Yuncheng, Shandong — While routine vehicle maintenance is standard practice for most fleet operators and drivers, the spare tire is frequently overlooked during meticulous upkeep. Over time, neglect can leave a spare tire completely unusable when an unexpected emergency arises. To ensure maximum reliability when you need it most, proper daily maintenance and regular inspection of the spare tire are essential.

I. Key Inspection Points for Spare Tires
- Check Tire Pressure:Always verify that the spare tire pressure is normal. Typically, a spare tire's pressure should be kept slightly higher than standard operating tires.
- Inspect for Wear and Cracks:Examine the surface for any wear or cracking. If fine cracks appear on the sidewall, the spare must not be used for long-distance or high-speed driving, as thin sidewalls increase the risk of a blowout.
- Monitor Tread Wear:Check the tread wear indicators; if the tread has worn down to the warning mark, the tire must be replaced promptly.
II. Critical Maintenance and Storage Precautions
- Keep Oils Away from Rubber:Tires are primarily made of rubber, which is highly vulnerable to corrosion from various oils. Storing lubricating oils or engine oil in storage compartments where they can leak onto the tire will cause swelling and severe degradation, drastically shortening tire lifespan. If oil contacts a tire, wash it off immediately with a neutral detergent.
- Remember Tire Aging Limits:Do not assume a spare tire lasts forever just because it avoids daily exposure to sunlight and road friction. Like all rubber products, tires age over time; standard tire aging is approximately 4 years, after which the spare tire should be replaced.
- A Spare Tire is Not a Permanent Replacement:Many drivers treat installing a spare tire as a permanent fix, forgetting to replace it with a new standard tire later. Because spare tires have low usage, different friction coefficients, and sometimes a smaller size (different aspect ratio, width, or diameter), prolonged use affects braking, steering, and suspension systems, while causing uneven wear on other tires. When using a temporary or compact spare tire, limit vehicle speed to no more than 80 km/h.
- Never Remove the Spare Tire:Some vehicle owners remove the spare tire to reduce weight and save fuel. While carrying a spare adds negligible weight compared to passengers, being caught without one during an emergency can result in massive losses or safety hazards.
- Ensure Complete Emergency Tools:A spare tire is useless without the proper tools. Routinely check that your tire changing kit, lug wrenches, and jacks are fully functional and ready for use.
- Strategic Placement of Repaired Tires:Pragmatic drivers often use repaired tires as spares. If a tire's tread was punctured by a nail without sidewall damage and repaired successfully, it can be reused but must always be mounted on a non-driving wheel (for front-wheel-drive vehicles, repaired tires should be placed on the rear axle to maintain steering control during a front tire blowout).
III. Manufacturing Excellence and Safety Standards at Yuncheng Jianxing
Proper maintenance paired with robust structural engineering ensures maximum fleet reliability. Operating a 140-acre smart manufacturing facility with an annual capacity of 9,000 units, Yuncheng Jianxing Special Vehicle Manufacturing Co., Ltd. produces high-performance lowbed semi-trailers, container skeleton trailers, and dump trailers equipped with advanced pneumatic braking systems, reinforced frames, and high-tensile steel.
Backed by ISO9001 and CCC certifications, 27 national utility model patents, and host-manufacturer (OEM) partnership status for Sinotruk and Dongfeng Commercial Vehicle, Jianxing delivers dependable transport solutions exported to over 20 countries worldwide—including maintaining the No. 1 market share in Vietnam for 5 consecutive years.


